Validation Antennas for IEC 62209-3 (AVALSET-3V1)

Description	AVALSET-3V1 is the set of antennas and accessories defined by IEC 62209-3 to validate the performance of any vector measurement-based system (e.g., array system). The manufacturers of these systems are obliged to validate the system if it is used for certification. AVALSET-3V1 also empowers regulators and users to independently verify the manufacturer-stated specifications. Validation warranties consistent results, independent of the device being measured.
Applications	Validation of the performance of any vector measurement-based system and verification of the uncertainty budget
Calibration	Each antenna comes with an ISO/IEC 17025 calibration certificate. Reference SAR values are provided in the calibration certificate for each location and distance for any phantom type: Flat (MSL, HSL), Left Head, Right Head

COMPONENTS
	Dipole Antennas Inductively-coupled sources with induced electric fields predominantly parallel to the phantom surface. Symmetrical dipole with λ/4 balun. Matched for use near flat phantoms filled with tissue simulating liquids. D750V3: 750 MHz Verification Dipole D835V2: 835 MHz Verification Dipole D900V2: 900 MHz Verification Dipole D1450V2: 1450 MHz Verification Dipole D1750V2: 1750 MHz Verification Dipole D1950V3: 1950 MHz Verification Dipole D2300V2: 2300 MHz Verification Dipole D2450V2: 2450 MHz Verification Dipole D2600V2: 2600 MHz Verification Dipole D3700V2: 3700 MHz Verification Dipole D5GHzV2: 5 GHz Verification Dipole SMA female 50 Ω for each dipole antenna Includes Verification Dipole Spacers (5 mm, 10 mm, 15 mm, 25 mm)
	Vertical PIFAs Sources that are capacitively-coupled to the phantom so that the peak field in the phantom is predominantly perpendicular to the phantom surface V-PIFA750V3: 750 MHz Vertical PIFA V-PIFA835V3: 835 MHz Vertical PIFA V-PIFA1950V3: 1950 MHz Vertical PIFA V-PIFA3700V3: 3700 MHz Vertical PIFA SMA female 50 Ω for each dipole antenna Includes 90 degree angle adapter for proper orientation of the coaxial cable Includes mounting block and spring-loaded antenna holder for use of VPIFAs with the VAHV1
	Dual-Peak Centrally-Fed Planar Inverted F Antennas (CPIFAs) Source with two SAR peaks at different magnitudes and locations. Tests the ability of the SAR measurement system to accurately measure both peaks 2P-PIFA2450V1: 2450 MHz Dual-Peak Centrally-Fed PIFA
	POWERSOURCE1 Stable and lightweight RF power source for convenient system verification and validation measurements. Generates CW signal at frequencies from 600 to 6000 MHz. Connects directly to antennas via coaxial connector. Detailed specifications: POWERSOURCE1 User video: cSAR3D Repeatability
	VAHV1 - Verification Antenna Holder for cSAR3D Articulated antenna holder with three joints, and spring-loaded end. It allows easy positioning of verification or validation antennas at a range of locations on the Flat, Left Head, or Right Head phantoms. The antenna can be moved in place with one hand while the locking mechanism is tightened with the other to hold it in place. Then the measurement is done hands-free.
	VDSV1 - Verification Dipole stand for cSAR3D Flat / Quad Polycarbonate stand for easy and stable positioning of dipole antennas at fixed locations on Flat and Quad phantoms
	Verification Dipole Spacers Spacers for dipole antennas, providing four distances: 5 mm 10 mm 15 mm 25 mm (15 mm + 10 mm extension)
	Verification Masks Masks defined in IEC 62209-3 for precise positioning of validation antennas at fixed locations on the left and right head phantoms
	Additional Equipment Required Power rack (purchased separately): Signal generator(s) capable of CW and the required modulation configurations for the full frequency range Amplifier Power meter with two power sensors Directional coupler Attenuators Cables

CONTACT INFORMATION

CONTACT