DASY6
DASY6banner.png
OVERVIEW

DASY6 Systems

What is DASY6?

DASY6 is the latest generation of the Dosimetric Assessment SYstem optimized for specific absorption rate (SAR) measurements, SAR compliance, and HAC evaluations. DASY6 builds on the power of our industry-leading dosimetric and near-field evaluation system, DASY52. Running on a significantly more robust platform and a more powerful measurement server, DASY6 offers much faster scanning with no sacrifice of measurement precision. All hardware and software are fully compatible with DASY52. The new system seamlessly integrates two software solutions, the novel cDASY V6.x – optimized for SAR compliance testing to significantly reduce SAR assessment costs – and the widely used DASY V5.2 for generalized near-field evaluations with maximized flexibility.

DASY6 Measurement Systems

Applications

DASY6 is a flexible, high-precision near-field scanner equipped with advanced software for performing any near-field scan in arbitrary volumes in free-space or any dielectric media.

Standards Compatibility

DASY6 is compatible with:

Robots

DASY6 is compatible with the TX60L, TX90XL, and RX160 robots.

Robot selection depends on the required volume and area scans or number of phantoms (see platforms).

Platforms

Various platforms that operate with 1.5 up to 4.5 phantoms are offered.

Measurement Server DASY6

The time-saving functions of cDASY6 can be fully exploited only with the new measurement server DASY6.

Probes

DASY6 is compatible with the following probes:

  • dosimetric probes: EX3DV4, ES3DV3, ET1DV4, EU2DV3 (software requirements: cDASY6/DASY52-SAR, DASY52-PRO, or DASY52-NEO)
  • mmWV probe: EUmmW (software requirements: cDASY6 5G module)
  • free-space probes: ER3DV6, EF3DV3, EU2DV3, H3DV6, H3DV7, H3DV8, HU2DV3 (software requirements: DASY52-PRO, DASY52-AIR, or DASY52-NEO)
  • temperature probes T1V3, T1V3LAB (software requirement: any DASY52-xxx)
  • TDS probes (software requirement: DASY52-NEO)
  • third-party probes (software requirement: DASY52-NEO)
Phantoms and Broadband Liquids

DASY6 systems are fully compatible with the following SAR phantoms:

  • SAM-Twin
  • ELI
  • SAM Chin20 Right/Left
  • SAM Face-Down
  • SAM Head-Stand
  • Wrist Phantom
  • Modular Flat Phantom (MFP)
  • Membrane Phantom (MEM)
  • Base Station Phantom (BSTP)

The systems are also compatible with the phantoms used with ZMT products. Custom-made phantoms can be easily integrated. 

DASY6 is also compatible with all tissue simulating liquids. 

Base-Station Simulator

cDASY6 inherently supports base-station simulators. The following base-station simulators are currently integrated:

  • Rohde & Schwarz CMW500
  • Rohde & Schwarz CMU200
  • Anritsu MT8820C, MT8821C
  • Keysight (Agilent) E5515C/E 8960

Other simulators and EUT firmware interfaces are user-programmable via an advanced Python interface.

The base-station simulators are connected via ANT, and the selected linearization parameters are verified via MAIA.

Python

The Python interface allows customization of the testing process with simple or extensive scripts (software requirements: cDASY6 for SAR testing and DASY V5.2 NEO for control of all features).

Calibration DASY6 supports the novel Sensor Model Calibration (SMC) method, Probe Modulation Response (PMR) calibration, and standard linearization for calibration of pulsed signals.
Compatibility The cDASY V6.x software is also fully compatible with cSAR3D and DAK. This allows cSAR3D to be seamlessly integrated into the certification process.
Upgrade Notes DASY52 systems can be easily upgraded to DASY6. The upgrade consists of the new software, a new phantom mounting structure with integrated probe alignment units, measurement server, MAIA, and ANT. In addition, novel broadband liquids are available.
Release April 2016

CONTACT
 
 
LATEST NEWS
 
 
 
 
UID Summary Updates
01/08/2017
 
cDASY6 Release V6.4
22/06/2017
 
cDASY6 Release V6.4
22/06/2017
 
 
created and designed by R.Ø.S.A.