CAL LABS (CH)
Dielectric Probe (DAK-TL)
DIELECTRIC PROBE CALIBRATION (e.g., DAK-TL PROBES)
| Measured Quantity |
Range |
Condition of measurement | Best Measurement Capability CMC for 7 mm probe (k = 2)* |
Remarks |
|
Permittivity Loss Tangent |
< 10 < 0.05 |
4 MHz ... 67 GHz |
4.5% ... 32.6% |
Sample thickness: 0.1 ... 0.2 mm |
|
Permittivity Loss Tangent |
1 ... 10 < 0.05 |
4 MHz ... 67 GHz |
3.5% ... 32.6% |
Sample thickness: 0.2 ... <1.0 mm |
|
Permittivity Loss Tangent |
1 ... 10 < 0.05 |
4 MHz ... 67 GHz |
3.2% ... 24.3% |
Sample thickness: 1.0 ... <10 mm |
|
Permittivity Loss Tangent |
> 10 > 0.05 |
4 MHz ... 67 GHz |
5.3% ... 20.9% |
Sample thickness: 0.1 ... 0.2 mm |
|
Permittivity Loss Tangent |
> 10 > 0.05 |
4 MHz ... 67 GHz |
3.5% ... 7.6% |
Sample thickness: 0.2 ... <1.0 mm |
|
Permittivity Loss Tangent |
> 10 > 0.05 |
4 MHz ... 67 GHz |
4.5% ... 5.2% |
Sample thickness: 1.0 ... <10 mm |
| * Short summary of measurement capability of the dielectric probe for thin layers of solids and liquids in small volumes . More details are specified in the Scope of Calibration. |
||||
| Calibration Procedure | SPEAG has been accredited by the Swiss Accreditation Service METAS according to ISO 17025 to conduct traceable calibration of DAK-TL from 4 MHz to 67 GHz (range dependent on DAK-TL beam type). Dielectric measurements with known uncertainty are important for many applications, e.g., for SAR measurements and therefore calibration is required. |
|||
| Contact |
For questions and quotations, please contact info@speag.swiss | |||
